Heating Tape


We believe that selling the best parts starts with partnering with the right companies. Some of the brands in our inventory are Dalton, Gefran and Vaisala. Not sure which manufacturers can best meet your business needs? As a leading distributor specializing in industrial heaters, we can help you find the right equipment. These include glass fibre, pole clamps and stainless steel on braid.

When using all-electric screw drives, the operation of the dryer in this way also reduces the load on the motor that drives the screw. Charging engine overheating seems to be a recurring problem with all-electric machines, and proper drying will reduce this problem. Nozzle elements are manufactured with high precision and high surface-bearing capacity to meet the high requirements of fast and safe heating. Heat transfer takes place by conduction or radiation in high-performance heating systems. They are suitable for heating solids as well as for heating liquids or gases. Low-profile terminals: available in all heaters with pole terminals.

Radiant heating relies on electromagnetic waves to radiate heat onto an object without the need for direct contact. While all electromagnetic waves “heat up”, the infrared band of the spectrum contains the most useful heating energy. Important factors in radiant heating are the distance between the object and the heat source and how well the object absorbs radiant energy. Gases absorb radiant energy poorly, so they remain largely unaffected by radiant heating. Dark surfaces absorb radiant heat better than light or reflective surfaces. Heat causes liquids or gases to expand, resulting in lower weight per unit volume.

The coil of the wire is passed through the ceramic to obtain a bed from the ceramic. The size of the bed depends on the diameter and width of the heater. The wire of the element is executed in a brass strip, from which the lead wires are drawn. The heater is equipped with a clamping device that has a cap screw to facilitate and even tighten the heating in the barrel. Next, a metal jacket with ceramic fiber is wrapped around the heater.

There are two steps you can take to ensure good contact with the machine running. First, make sure that the measurement of the outer diameter of the machine run is accurate. The manufacturer of the heater takes into account a space of 0.25 “, so it is not necessary to reduce the dimensions Mica Band Heater Manufacturer of the belt. The soaking time may be available on some machines and is the time between the time when the last belt of the heater has reached its set point and the time when the machine starts the extruder. The soaking time is different for the extruder and the hot runner.

So this is a great way to meet your heating needs while staying under budget. 2 Energy efficiency, the resistance cable we use is NiCr 8020wire, which is very good at heat transfer. Strain Relief Spring – Drive over a stainless steel overhang (about 4″ cover from where the cable heater comes out).

Therefore, there is a strong argument for using the latest drying technology, which makes it possible to adjust the residence time at the output to have the most profitable operation. The temperature of the plastic and mold is controlled during injection molding. The plastic is heated in the cylinder while the plastic passes through the screw during processing. Belt heaters and cartridge heaters are very similar in design and application. Strip heaters, on the other hand, use a straight design and often have slats to heat the ambient air. In harsh environments, these heaters can be sealed and built with various elements for a more durable design.

Belt heaters are ring-shaped heaters that are attached around a cylindrical element. The heat transfer of belt heaters is carried out by the conductive process. Some products are attached around the inner diameter of a pipe. Usually, belt heaters are combined with ceramic or mineral insulation to reduce heat loss in the environment.

The warming effect that lightning has in the room is similar to sunlight. It provides relaxing heat, radiant heat, just like infrared heaters. This cable nozzle heater is manufactured using the Watlow compression process. This process ensures greater compaction of the mgO insulation than the competing lamination process. The compression of the MgO insulation to a solid mass results in excellent thermal conductivity and high dielectric strength.